Accessorize your awning with a range of storm supports and tie down kits including the full range of Fiamma Rafters and Rafter Pro. Camperlands also stock an extensive range of buckle tie down kits, door poles and rear support poles to give your awning a better seal against your caravan or motorhome.
Awning fixing kits for mounting the Fiamma F35, F45 and F65 case awnings to your camper van or motorhome. With kits available for Sprinter, Ducato, Transit and all varieties of VW camper it is easy to choose the correct adapter kit for your vehicle for safe and secure fixing of your Fiamma awning.
Add a little privacy or shade to your Fiamma caravan or motorhome awning with a range of rooms, walls and sun-shades for the Fiamma range of awnings. Camperlands stock the Fiamma Blocker and Blocker Pro side panels for Fiamma F45 and Caravanstore awnings and offer great prices on Privacy and Safari rooms.
Flexible kador strip is used with figure 8 connector for connecting drive-away awnings to awning C rail or lead bar of wind-out awnings on caravans and motorhomes. 2 versions available and cut to length to suit your requirements.
Soft plastic suckers with a stem to fit through an eyelet. The NRF suckers are ideal for fitting a thermal screen to the windscreen of your car or van, or to fit a draught skirt to your caravan or motorhome without having to screw press studs into your 'van body.
Improved version of Tie Down, the Tie Down S allows for solid anchoring of the Fiamma F45, F65 and F80 awnings by attaching directly to the front leading edge of the awning. The Fiamma Tie Down S may also be used with any Fiamma Privacy Room from version 2009, by way of buckle that attached to the Privacy side panel.
replacement ball joint for caravan awning poles. As used on Trio and Eurovent awnings.
Single Edged Sew on Kador Strip
A pair of spare air valves suitable for all Sunncamp Air Volution inflatable tents, porch awnings and drive-away awnings. Screw in inflation valve includes dust cap.
Fits to main beams and short ridge / storm beams. Keep a pair with you in case of accidental loss or damage on the campsite.
Telescopic canopy tension rafter for wind-out awnings which supports the awning roof and is fitted from the vehicle to the front of the awning. Fiamma Rafter prevents the canopy fabric from sagging and water pooling on the awning roof in heavy rain, and can also help keep the canopy fabric taut in the centre of the roof on longer awnings.
Convenient rubber strip to seal the gap between the Fiamma awning and the motorhome wall to prevent water from dripping down from behind the awning case. This version Rain Guard is for Fiamma F45 and Fiamma ZIP awnings mounted on to motorhome wall where the wall sticks up above the top of the awning case.
A Pair Of Replacement Air Valves For All Sunncamp Air Volution Models In Grey
A pack of 3 x approximately 80cm sections of Figure 8 sections for connecting your drive-away awning to a combi rail or a "J" or "C" profile awning rail on campervans or motorhomes.
Strong suction pad to fix the pole of your awning to the vehicle wall without the need to drill the caravan wall and avoiding the possibility of damage.
Fits awning poles up to 22mm ( 7/8 inch ) outer diameter.
Ideal for hanging light objects such as lights, plants, sunscreens, clothes etc. Also suitable for other awning brands with a 7mm slot. The Fiamma Awning Hangers Kit is composed of 6 hooks to insert into the lead bar profile.
Single Isabella FixOn II caravan awning pole clamp. Fixes the to beading on the inside of your caravan awning and provides a hooking point for the awnings frame against the side of the caravan.
Pack of 10 stainless steel awning rail screws. Self tapping screws for fitting awning rail to the side of caravan or motorhome.
No6 x 1/2" cross head screws.
Drive-away fixing kit to attach awnings to vehicles with awning 'C' rail or Fiamma / Omnistore awnings.
Aluminium Spike Adjustable Pole 170/260cm