Fiamma Water Seal - Rain Guard Small

Convenient rubber strip to seal the gap between the Fiamma awning and the motorhome wall to prevent water from dripping down from behind the awning case. This version Rain Guard is for Fiamma F45 and Fiamma ZIP awnings mounted to motorhome wall where the wall sticks up above the top of the awning case.

Available in 3 sizes (Rain Guard S, M and L) to cover different size gaps between the awning case and motorhome wall.

Rain Guard water seal is sold by the metre - Select length required from the list above.

No additional sealants or adhesives are required and they can be installed without removing the Fiamma awning. Fiamma Rain Guard S, M and L fit to the hooked lip on the top of the awning case.

• Rain Guard S is pressed against the motorhome wall.
• Rain Guard M and L rest against the motorhome wall or edge of roof

Compatibility

Fiamma Rain Guard S, M and L fit to any length of F45 S, F45 L and Fiamma ZIP awning. These Rain Guards fit to the top of the awning case.

In order to seal the gap between the awning case and the vehicle, the van roof MUST be above the top of the awning case.

• Use Rain Guard S - For flat wall and gaps up to 1.1cm
• Use Rain Guard M - For flat wall or curved roof with gap up to 3cm
• Use Rain Guard L - For flat wall or curved roof with gap up to 8cm

Specification:

• Dimensions: see images above.
• Colour: Platinum Grey.
• Construction: durable rubber with UV protection.
• Installation: attaches to awning case without glue.