Accessorize your awning with a range of storm supports and tie down kits including the full range of Fiamma Rafters and Rafter Pro. Camperlands also stock an extensive range of buckle tie down kits, door poles and rear support poles to give your awning a better seal against your caravan or motorhome.
Awning fixing kits for mounting the Fiamma F35, F45 and F65 case awnings to your camper van or motorhome. With kits available for Sprinter, Ducato, Transit and all varieties of VW camper it is easy to choose the correct adapter kit for your vehicle for safe and secure fixing of your Fiamma awning.
Add a little privacy or shade to your Fiamma caravan or motorhome awning with a range of rooms, walls and sun-shades for the Fiamma range of awnings. Camperlands stock the Fiamma Blocker and Blocker Pro side panels for Fiamma F45 and Caravanstore awnings and offer great prices on Privacy and Safari rooms.
Strong suction pad to fix the pole of your awning to the vehicle wall without the need to drill the caravan wall and avoiding the possibility of damage.
Fits awning poles up to 19mm ( 3/4 inch ) outer diameter.
Strong suction pad to fix the pole of your awning to the vehicle wall without the need to drill the caravan wall and avoiding the possibility of damage.
Fits awning poles up to 22mm ( 7/8 inch ) outer diameter.
Aluminium Spike Adjustable Pole 170/260cm
Aluminium Spike Adjustable Pole 170/260cm
C profile Awning Rail for DIY fitting to caravans and motorhomes sold in 4.0 metre length aluminium sections.
PVC skirt to cover the gap between the bottom of your caravan or motorhome and the ground to exclude draughts from your awning. Multiple connection options and available in 2 heights and cut to length to match your requirements.
Pack of 10 stainless steel awning rail screws. Self tapping screws for fitting awning rail to the side of caravan or motorhome.
No6 x 1/2" cross head screws.
Used for securing covers tarpaulins etc
This is a fantastic accessory designed to fit the CampTech Prestige DL caravan porch awning, it insulates the roof making the awning cooler in hot weather and warmer in the cold.
Awning roof liner to fit CampTech caravan awnings in size 16.
CampTech Draft Skirt - 50cm height. Sold by the meter.
Pennine Caravan Awning Brackets
A draught skirt and a wheel arch cover to fit a fiat ducato or peugeot boxer camper/motorhome. The fitting uses magnets and hooks to attach to the front wheel and around the rear of the vehicle.
the length of the skirt is 390cm.
A draught skirt and wheel arch cover to fit a coach built motorhome. You have to drill and fix the press studs which are provided to the body of the motorhome and then the skirting attaches to the press studs with poppers.
Awning Combi Rail to fit to either side of low roof, long wheel base Renault Trafic and Vauxhall Vivaro vans. The rail provides various options to fit a drive-away awning and doubles as a rain gutter as well as offering an alternative way to attach a Fiamma F45 or F35 awning when used with the appropriate fitting kit.
Awning Combi Rail to fit to either side of low roof, long wheel base Renault Trafic and Vauxhall Vivaro vans. The rail provides various options to fit a drive-away awning and doubles as a rain gutter as well as offering an alternative way to attach a Fiamma F45 or F35 awning when used with the appropriate fitting kit.
Ideal for use as groundsheets and rain covers when camping, as a rain cover for barbeques, for covering garden equipment, boats, agricultural products, building materials and much more.
Replacement eyelet bracket to fit the Privacy Room Door Pole to Fiamma F65 awnings. Fits to F65 S and F65 L.
The Fiamma Rain Guard Sample pack consists approximately 10cm lengths of each of the Fiamma Rain Guard S, M, L and Lower. If you are unsure which Rain Guard you require purchase this pack to check and test the different styles of Rain Guard with your awning.
Fiamma Kit Cables Guide is a kit of 2 elegant flexible profiles suitable for hiding the electrical cables in the awnings with arms provided with guide preset for the passing of cables. Made of flexible extruded rubber. One Kit is required for Fiamma Awning Arms LED and two kits are needed for Fiamma Kit Awning LED.