Awning Accessories

Soft plastic suckers with a stem to fit through an eyelet. The NRF suckers are ideal for fitting a thermal screen to the windscreen of your car or van, or to fit a draught skirt to your caravan or motorhome without having to screw press studs into your 'van body.

Improved version of Tie Down, the Tie Down S allows for solid anchoring of the Fiamma F45, F65 and F80 awnings by attaching directly to the front leading edge of the awning. The Fiamma Tie Down S may also be used with any Fiamma Privacy Room from version 2009, by way of buckle that attached to the Privacy side panel.

Telescopic canopy tension rafter for wind-out awnings which supports the awning roof and is fitted from the vehicle to the front of the awning. Fiamma Rafter prevents the canopy fabric from sagging and water pooling on the awning roof in heavy rain, and can also help keep the canopy fabric taut in the centre of the roof on longer awnings.

A pair of spare air valves suitable for all Sunncamp Air Volution inflatable tents, porch awnings and drive-away awnings. Screw in inflation valve includes dust cap.

Fits to main beams and short ridge / storm beams. Keep a pair with you in case of accidental loss or damage on the campsite.

Convenient rubber strip to seal the gap between the Fiamma awning and the motorhome wall to prevent water from dripping down from behind the awning case. This version Rain Guard is for Fiamma F45 and Fiamma ZIP awnings mounted on to motorhome wall where the wall sticks up above the top of the awning case.

A pack of 3 x approximately 80cm sections of Figure 8 sections for connecting your drive-away awning to a combi rail or a "J" or "C" profile awning rail on campervans or motorhomes.

Strong suction pad to fix the pole of your awning to the vehicle wall without the need to drill the caravan wall and avoiding the possibility of damage.

Fits awning poles up to 22mm ( 7/8 inch ) outer diameter.