Home > Caravan & Motorhome > Water & Waste > Water Heaters > Pundmann Water Heater 3L Twin Rod 230V 250W and 12V 180W

Pundmann Water Heater 3L Twin Rod 230V 250W and 12V 180W

Pundmann Water Heater 3L Twin Rod 230V 250W and 12V 180W
Dimensions
SKU: WH76010
£319.00 Inc. VAT
Quantity
Usually Dispatched in1 working day

The Pundmann Water Heater 3 Litre Twin Rod is intended to bring creature comfort to camper van adventures. The twin rod allows you to run the water heater / boiler off mains electricity, your 12 Volt leisure battery or both. Made from food grade stainless steel this 3 litre water boiler is compact and narrow so it will fit in the wardrobe of VW Campervans such as T4, T5 or T6, and supplies enough hot water for washing up and wiping down. When the boiler is run using both heater rods your water will heat to 60°C in as little as 50 minutes.

Designed to heat up as you travel, it is fully compatible with solar power for when the sun is shining. This boiler is supplied with an insulated jacket to keep your water warmer for longer and has a built in 3.0 bar pressure release valve.

It is compact and easy to install for efficient use of small spaces as well as being safe and stable. We would advise using a pump with 1.1bar/20psi and 7litres per minute with this heater / boiler.

Water inlet and outlet spigots are designed for use with both barbed 10mm internal diameter hose and hose-clips (these may need re-tightening once the system is under pressure), or 10mm push-fit connectors.

We recommend installing a thermostatic blending valve to control the maximum temperature of water to the tap.


Features

  • Twin immersion heater rods, 12V 180W and 230V 250W fitted with 5A 3 pin plug
  • Perfect for campervans boats, off grid locations & service vehicles
  • Insulated 304 stainless steel welded tank with high quality stainless heating pads
  • Designed for safe use up to 2.3bar
  • Supplied and fitted with a 3 bar hot water safety pressure release valve
  • Engineered to provide excellent service and has a 3 year return to base warranty.

Specifications

  • Voltage description: 12V DC and 230V AC
  • Height description: 200mm, Width: 228mm
  • Length: Heater 217mm, connections 85mm
  • Wattage: 180W at 12V, 250W at 230V
  • Operating pressure: 2.3 bar maximum
  • Hose tail size: 10mm-3/8"
  • Capacity: 3L
  • Weight: 4.9KG

Click to download Frequently Asked Questions about the Pundmann Heaters.