Gas system fittings and spares for both metric and imperial gas systems found in boats, caravans and motorhomes. Camperlands hold a range of regulators for fitting to different brands of gas bottle.
If you are planning a van conversion project or refitting the gas system in your caravan you should use copper pipe and correct fittings and not rubber hose to meet relevant regulations. We also recommend you have your work check by a registered gas engineer.
Imperial and metric copper gas pipe fittings including valves, angles, connectors and adapters giving you all the materials you need for proper maintenance of your caravan gas system.
Adapter to connect a 1/4" thread fitting to an 8mm copper or steel pipe gas system
Provides a secure ending connection to the end of a copper or steel gas pipe.
<Dimensions: 8mm x 8mm Fulham Nozzle Hose Connection
A quick release connection and nozzle allowing an appliance to be quickly removed from the gas bottle without the need to remove the regulator.
Especially suitable for gas barbecues, etc.
Caravan Motorhome Double Two Way Gas Manifold Valve With Taps 8mm
Valve nut for the LPG gas manifold on caravans and motorhomes. Screws to the manifold branch and used with Manifold Olive to seal to 8mm copper pipe, or used with Manifold Blanking Bullet to seal an unused branch.
Adapter to connect a 3/8" BSP thread fitting to a 8mm copper or steel pipe gas system.
Caravan Motorhome Single Way Gas Manifold Valve With Tap 8mm
This is a gas bottle adapter which has a Ø21mm connection to fit to a butane LPG bottle with clip-on valve. This allows you to connect it to a bulkhead mounted regulator on a caravan or motorhome using a butane pigtail.
Pack of 5 P clips used for securing cables or pipes up to 1 1/4" or 31mm diameter.
Regulates gas pressure to constant 37mbar straight from the bottle with screw on fitting to fit Propane gas bottles and handwheel tightening for easier fitting. Outlet nozzle fits to 8mm (5/16 inch) gas hose.