Gas system fittings and spares for both metric and imperial gas systems found in boats, caravans and motorhomes. Camperlands hold a range of regulators for fitting to different brands of gas bottle.
If you are planning a van conversion project or refitting the gas system in your caravan you should use copper pipe and correct fittings and not rubber hose to meet relevant regulations. We also recommend you have your work check by a registered gas engineer.
Imperial and metric copper gas pipe fittings including valves, angles, connectors and adapters giving you all the materials you need for proper maintenance of your caravan gas system.
Steel P pipe clip to secure gas pipe to the wall or bulkhead in campervans and caravans. Suitable for 8mm diameter copper or steel pipe. Fitted with rubber lining to prevent chaffing and abrasion of the pipe.
Steel P pipe clip to secure gas pipe to the wall or bulkhead in campervans and caravans. Suitable for 10mm diameter copper or steel pipe. Fitted with rubber lining to prevent chaffing and abrasion of the pipe.
Pack of 5 P clips used for securing cables or pipes up to 6mm diameter.
Orange gas hose with 8mm (5/16 inch) inner diameter. Used to connect low pressure gas appliances such as camping stoves, BBQs, portable heaters and camping fridges to pressure regulator on refillable gas bottle.
Suitable for use with both Propane and Butane gas
Truma 10mm olive suitable with Truma gas regulators
Pack of 5 P clips used for securing cables or pipes up to 1 1/4" or 31mm diameter.
Used to seal the floor where cables enter
Used to seal the floor where cables enter
A 8mm brass olive for gas tight connections of 10mm copper tube to LPG gas manifolds.
Used to seal the floor where cables enter
Compression olive for fittings on copper or steel pipe gas systems.
Truma brass shoulder olive 8mm
Chamfered compression olive for fittings on copper or steel pipe gas systems.