Fiamma adapter kit suitable for installation of Fiamma F45 S and Fiamma Zip to Hymer Exsis motorhome and Hobby 2009 Caravans. One piece kit measuring 300 cm in length. Anodised aluminium construction.
Kit consisting of 2x end stop with securing screws that attach to the awning rail to prevent the Caravanstore from sliding in the rail.
Fiamma Rafter Wall Support Kit suitable for all models of Fiamma Caravanstore. Kit consisting of 2x twin supports, 2 x rubber backing pads and fixing pins. Easy DIY installation.
Awning Combi Rail to fit to left hand side of low roof, short wheel base Ford Transit Custom vans. The rail provides various options to fit a drive-away awning and doubles as a rain gutter as well as offering an alternative way to attach a Fiamma F45 or F35 awning when used with the appropriate fitting kit.
Awning Combi Rail to fit to left hand side of short wheel base VW Transporter T4, T5 and T6 vans with low roof. The rail provides various options to fit a drive-away awning and doubles as a rain gutter as well as offering an alternative way to attach a Fiamma F45 or F35 awning when used with the appropriate fitting kit.
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. Design your own awning adapter kit according to your motorhome requirements.
Fiamma Adapter Arca
Single piece installation kit for F45 and other wall mounted Fiamma wind-out awnings available in versions to suit awnings from length 300 to 450.
Fiamma awning installation adapter kit for the installation of Fiamma F45 S and Fiamma Zip awnings to Hymer Van / B2 motorhomes. Suitable for Hymer Classic B, Klasse and Starline motorhomes. Available as a single piece adapter of length 350cm, 400cm or 450cm, or as a 4 bracket kit.
A range of installation kits including bracket set, installation bolts, backing plates and plate cover for bolt-trough-wall installation of Fiamma F45 awnings on coachbuilt motorhome and other flat wall fitting.
Fiamma awning installation kit suitable for fitting Fiamma Compass awning to the RIGHT HAND SIDE of Renault Trafic, Opel Vivaro and Nissan Primaster from 2015. Kit is for standard (low) roof vans and suit SWB and LWB vans.
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. The only modular bracket fitted to compensate the curved roof of the minivan. Suitable for Renault Master 98, Fiat Ducato, Citroen Jumper and Peugeot Boxer.
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. Suitable for Rapido 9 motorhomes.
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. Suitable for motorhomes with fitted roof rails. A minimum of two pieces required to install an awning.
Single, 40cm long aluminium installation bracket for the Fiamma F45 awnings. Suitable for bolt-through-wall installation of F45 awnings on coach-built motorhome and other flat wall installation.
Fiamma awning installation kit suitable for fitting Fiamma Compass awning to the RIGHT HAND SIDE of Renault Trafic, Opel Vivaro and Nissan Primaster from 2001 to 2014. Kit is for standard (low) roof vans and suit SWB and LWB vans.