4 way blade fuse holder for Regular blade or automotive fuses. Plastic housing holds upto 4 blade fuses and has a clip on dust cover and feet which can be screwed to the wall or floor.
Fridge Extension loom to connect the fridge to the Relay Housing on the BCA Electrical converters wiring harness system.
Fused, switched spur for 230 Volt mains C-Line modular socket system with 10 amp fuse.
Bulkhead mounting battery isolation switch including isolation key and key hole dust cover. This switch has a circuit capacity upto 200A and suitable for circuits upto 24 Volts.
Bulkhead mounting battery isolation switch including isolation key and key hole dust cover. This switch has a circuit capacity upto 100A and suitable for circuits upto 24 Volts.
Pennine dual stage power supply link.
Mains socket tester commonly used in caravans, motorhomes and boats to confirm polarity and earth connection of mains supply when you connect on site.
Mega fuse holder complete with 2 x 50 Amp strip fuses and 2 x crimp fitting ring terminals for cable connection and suitable for cables with conductor upto 4mm diameter.
Light Extension loom to connect the interior lights to the Relay Housing on the BCA Electrical converters wiring harness system.
Wiring harness to connect Switch Control Panel to Relay Housing as part of BCA Electrical converters wiring system.
12 Volt Power Inverter to provide a 300W, 240V AC supply from a 12 volt DC source. Run small mains appliances from your leisure battery or 12 volt system. Supplied with leads with cigarette plug and crocodile clips.
Powerpart Mains Consumer Unit with 25 Amp Double Pole RCD and 10 Amp Double Pole MCB to provide trip protection for mains circuits on smaller caravans and motorhomes or simple van conversion (campervan) with 1 mains circuit.
Pre-wired switch panel for use with BCA Electrical campervan converters harness system. Provides switch control of 12 Volt functions and battery status check and includes C-Line switch plates.
Powerpart Mains Consumer Unit with 1 x 25 Amp Double Pole RCD, 1 x 10 Amp and 1 x 6 Amp Double Pole MCB to provide trip protection for mains circuits on larger caravans and motorhomes or more complex van conversion (campervan) with 2 mains circuits.
Caravan or campervan mains installation kit including all required items to install a simple mains system in your caravan or campervan.
Powerpart Standard Mains Consumer Unit which is prewired for easy connection to other accessories which form part of the BCA Convert's Wiring System. Fitted with quick connectors to fit to prewired mains inlet and BCA prewired mains sockets.