Fiamma F35 Pro 220 - Royal Grey - 2014 Version - SECONDS

Please Note - This awning is used, but in good condition; there are some imperfections on the awning case as photographed, though the majority are on the rear of the case and thus not visible when fitted to your vehicle. The canopy and all parts within the case are near pristine.

A manual roll-out canopy awning which packs in to a compact and sturdy lightweight aluminium case.

The Fiamma F35 Pro is a simple to operate awning which can be fitted directly to the straight section of a caravan awning rail, or used with one of an extensive range of fitting kits which make it a cost effective option for many makes and models of campervan, minivan and 4x4.

The F35 Pro awning consists of a large canopy fabric wrapped around an aluminium roller tube. When opened the F35 canopy provides a lightweight sun shade or rain shelter, and when packed it all fits within a neat, compact case fitted to the van roof so there is no need to find storage space inside the van.

Available in 2 case colours, the Titanium case awning is available in lengths from 180 to 300 to suit a wide variety of van sizes and styles. Most awning sizes allow the option of fitting individual front or side panels, and sizes from 250 upward can be equipped with a full room enclosure.

F35 Pro Set Up

To set up up the awning you simply open the case and unravel the roof fabric which is wrapped around the aluminium roller. Then, pull out and extend the hinged rafters and legs which are housed within the roller tube.

Because the F35 is made using only lightweight materials there is no heavy lifting or particular strength required for set up, and you can erect your van shelter in around 45 seconds.

Compatibility

Caravan / Awning Rail Installation

The Fiamma F35 pro has a hook profile which runs along the top of the awning case for its full length. This allows the F35 to be hooked in to straight section of awning rail on a caravan, or means a simple awning rail can be fitted for flat wall installation on a van.*

Campervan and 4x4 Installation

For installation on vans and 4x4s, Fiamma there are an extensive range of fittings kits to suit vehicles such as

• VW Transporter T5/T6 - various versions
• VW Transporter T4 - including most lift / pop-up roof
• VW T3 (T25)
• Mazda Bongo / Ford Freda - Some versions
• Ford Transit Custom
• Vauxhall Vivaro / Renault Trafic - 2001-2014 and 2015 on
• Mercedes Viano / Vito - select versions
• Eriba Touring Caravans
• Generic Roof bar and flat wall installation

You can browse our range of Fiamma F35 Fitting Kits to find one to match your vehicle, or email sales@agentfiamma.co.uk for assistance.

F35 Pro Features

Hard Box - Super lightweight anodized aluminium awning case available in Titanium or Deep Black finish

Legs In - Legs and Rafters are stored inside the roller tube and are hinged and telescopic making them easy to take out and install and impossible to loose.

Roller Tube - Made from lightweight aluminium it is easy to set up, and can be rolled in either direction when packing away

Double guide - The lead bar of the awning has 2 channels allowing it to be equipped with a range of optional panels and accessories

Easy Installation - Simple attachment to straight awning rail, or make use of the range of vehicle specific fitting kits

F35 Pro Specification

Equipment

Fiamma F35 Standard Kit

Fiamma F35 Pro awnings are delivered with Ground Pegs -- Fixing Bolt-- 2 x Guyline -- Leg Wall Brackets

Fiamma F35 Optional Kit

You can equip your F35 awning with a range of additional accessories including;

• Vehicle specific fitting kits
• Individual side and front panels for most awning lengths
• Complete Privacy Room enclosure for F35 250 upward
• Range of optional Tie Down kits, Rafters, Pegs and Plates kits