Fiamma ZIP (F45) Motorhome Awning Canopy

Special version of the Fiamma F45 wind-out cassette awning for Motorhomes. The Fiamma ZIP canopy is fitted with zips on the edge of the canopy roof fabric to allow you to fit the Fiamma ZIP Privacy Room (sold separately) to turn the ZIP awning in to a complete, enclosed living space.

The Fiamma ZIP canopy is available in lengths from 300 to 450 to suit a range of vehicle sizes and is supplied with a standard installation kit so it can be mounted to the wall of coachbuilt motorhomes. Optional fitting kits are available for non-standard installation and to fit to other flat wall vans including Ford Transit, Fiat Ducato / Peugeot Boxer, Renault Master / Vauxhall Movano, Merc Sprinter / VW Crafter and others.

The latest generation of Fiamma ZIP motorhome awning is based on the Fiamma F45 S. The Canopy of the Fiamma ZIP is unique as it has two sturdy YKK zips sewn into each end, allowing the connection of the ZIP side panels. The YKK Zip connection between the ZIP panels and awning canopy provides water and wind insulation and total privacy. The front panel of the Fiamma Zip slides easily through the lead bar and is then secured to the side panels via a further two sturdy and self-lubricating YKK Zips. Within minutes you have effectively doubled your motorhome living space, with the awning transformed into a fully enclosed room (sometimes referred to as Safari Room), offering shelter and privacy for you and your family.

Video

Video shows complete ZIP system including ZIP Privacy Room. The product on this page is just the ZIP canopy. The ZIP Privacy Room can be purchased separately at extra cost.

Features:

Fiamma Zip Awning Canopy

Cool and cheerful canopy without seams in UV resistant, waterproof and washable vinyl. Bright colours printed on both sides. The Fiamma canopy guarantees higher resistance to UV rays. It does not fade in the sun and the absence of seams allows high resistance to water and tearing. It is flame retardant, can be rewound when damp, is light-resistant and is rot and waterproof.

Canopy Major Benefits: Excellent design, very sturdy and easy and safe to operate. Silent when opening and closing and while travelling. Easy to hook the winch eye using the supplied Crank Handle. Large canopy surface offering maximum shade. A fitted regulation system for the smooth closure of the front lead bar, a self locking security mechanism called Auto-Lock and Dual Security system to indicate the correct closure of the front bar.

Canopy Standard Kit: Presto Fix, New Reinforced arms with twin cable, Extra Strong Arms, Dual Shock Absorber, Auto-Lock, Dual Security, Folding Crank handle, Tension Rafter (2x Tension Rafter for ZIP 450), AS Brackets and internal 'M' bracket covers, Pegs to secure legs to the ground and Wall brackets for leg support to the motorhome.

Versions & Compatibility

The Fiamma ZIP canopy is supplied with a standard fitting kit for wall mounting on a coach-built motorhome. It can also be fitted on other vehicles using the of Fiamma F45 awning installation kits.

However, the Fiamma ZIP Privacy Room is only available in sizes to fit installation heights from 225cm to 280cm and the ZIP canopy case should overhang the edge of the vehicle in order for the ZIP Privacy Room to fit properly. If you are fitting outside this height range you will not be able to fit the ZIP Privacy Room so you might as well save some money and buy the standard Fiamma F45 awning available on our Fiamma Motorhome Awnings page

Choosing awning length

Measure available space A on your motorhome and select awning length to match from specification table below

Checking Suitability

Measure installation height B to confirm there is a ZIP Privacy Room available to suit your set up. Installation height should be between 225cm and 280cm for ZIP system to be suitable.

Specification:

Downloads: