Gas system fittings and spares for both metric and imperial gas systems found in boats, caravans and motorhomes. Camperlands hold a range of regulators for fitting to different brands of gas bottle.
If you are planning a van conversion project or refitting the gas system in your caravan you should use copper pipe and correct fittings and not rubber hose to meet relevant regulations. We also recommend you have your work check by a registered gas engineer.
Imperial and metric copper gas pipe fittings including valves, angles, connectors and adapters giving you all the materials you need for proper maintenance of your caravan gas system.
Adapter to connect a 3/8" BSP thread fitting to a 8mm copper or steel pipe gas system.
Adapter to connect a 1/4" BSP thread fitting to a 1/4" copper or steel pipe gas system.
Adapter to connect a 1/4" thread fitting to an 8mm copper or steel pipe gas system
Adapter to connect a thread fitting to a copper pipe gas system.
Gas level gauge which connects to caravan bulkhead regulators.
Valve nut for the LPG gas manifold on caravans and motorhomes. Screws to the manifold branch and used with Manifold Olive to seal to 8mm copper pipe, or used with Manifold Blanking Bullet to seal an unused branch.
Orange gas hose with 8mm (5/16 inch) inner diameter. Used to connect low pressure gas appliances such as camping stoves, BBQs, portable heaters and camping fridges to pressure regulator on refillable gas bottle.
Suitable for use with both Propane and Butane gas
Regulates gas pressure to a steady 37mbar straight from the bottle. 27mm clip-on attachment for Patio gas bottles
Regulates gas pressure to a steady 37mbar straight from the bottle. 27mm clip-on attachment for Patio gas bottles