This search took 1.1816 seconds
Sink Plug - 7/8" for 3/4 inch plug hole
... Tapered caravan sink plug measures 7/8 inch (22.2mm) diameter at the top and just under 3/4 inch (19mm) diameter at the top to fit sinks with 3/4 inch plug hole drain...
Push Toilet Lock Brown (with Rod Hole)
... Push lock toilet door lock with rod holes...Rod holes are to fit the rod which operates the top upper and lower hooks (not supplied) on the toilet door if these are fitted...
Battery Isolation Switch - 200 Amp
... Bulkhead mounting battery isolation switch including isolation key and key hole dust cover...57mm diameter circular surface mounting plate with 2 screw holes with 6mm diameter and 38mm hole centre distance...
Sink Waste Angled - 39mm Reich
...This waste is suitable for sinks with a 39mm diameter hole and fits to convolute waste hose with inner diameter of 25mm...Fits to caravan sinks with 39mm diameter cut out hole and upto 5mm thick...
Battery Isolation Switch - 100 Amp
... Bulkhead mounting battery isolation switch including isolation key and key hole dust cover...57mm diameter circular surface mounting plate with 2 screw holes with 5mm diameter and 39mm hole centre distance...
Fiamma Table System - Cap
... Plastic cap to cover the hole in the Fiamma Recessed Base or Conic Base when not in use...Gives a neater look and prevents dirt and small items being dropped in to the hole...
Fiamma Table System - Recessed Connection
...Recess Base measures 11cm diameter and requires a minimum 62mm diameter cut out hole in the habitation floor with minimum 48mm depth...When not in use to support the Tube Pro* table leg, the hole in the Recessed Connection can be covered with Fiamma Cap*...
Thule Vent 12V Translucent
...Dimensions To fit hole size 400 x 400mm Exterior dimensions: 459mm x 472mm Suitable for roof thicknesses of 25 - 60mm Also available with a white top cover...
Sink Waste Angled 1 1/4" to 28mm Waste Pipe
...k Waste with 1 1/4" plug hole which connects directly to 28mm Waste Pipe or 28.5mm waste hose via an adapter Fits to sinks with a waste cutout hole of between 40mm (1 9/16 inch) and 50mm (2 inch...
Sink Waste Angled 1 1/4" to 20.5mm Hose
... Angled Sink Waste with 1 1/4" plug hole which connects directly to 20.5mm (3/4 inch) internal diameter convolute waste hose or to 23.5mm waste hose if used with a sealing sleeve...Fits to sinks with a waste cutout hole of between 40mm (1 9/16 inch) and 50mm (2 inch) diameter and upto 4mm thick...
-
Result pages:
123
Similar Search Words
- There are no similar search words -
Common terms in this search:
angled
base
bike
can
carbonx
carry
centre
complete
connection
convolute
cover
diameter
directly
dismountable
door
end
fiamma
fit
fits
fitting
fixing
from
hole
holes
hose
inch
inner
isabella
isolation
key
lock
mounting
not
nuts
part
pcs
plug
recessed
rod
roof
screw
sealing
sink
sinks
sleeve
suitable
supplied
support
switch
system
table
tap
top
under
upto
use
used
waste
when
which