Extension Tube for SAS HD Wheelclamps - 1 Inch

Adapter tube to allow the SAS HD range of wheel clamps to be fitted to wheels with inset rims. Tube fits to the wheel clamp and gives it the extra reach in to the dished profile of the wheel and cover the wheel nut.

SAS Extension Tubes are designed to be compatible with the HD Range of Wheel Clamps. Often on wide tyres the rims are centrally placed in middle of the tyre, meaning the standard SAS clamp wheel bolt cover tube will not sit against the rim and over the nut, but float in front of it.

The question is often asked, “why won’t my SAS wheel clamp fit my wheel?” here. To make it fit the extension tube covers the distance in the inside of the wheel to reach over the wheel bolt and clamp tight on the wheel.

The black plastic end cap shown in the photo on the end of the Extension tube is not supplied. You must take the one on the clamp already and put it on the extension tube