Pack of 3 self-adhesive, transparent awning repair patches to repair small holes in awnings or tents.
Dimensions: 7.5cm x 15cm
Thule Curtain Set 1, set of 6 curtains suitable for the Thule Residence G3 in lengths 3.00 - 4.00m & the Thule Panorama Room in lengths 3.00 - 4.50m
The Thule View Blocker G2 - Front is a front panel which is made from top-quality PVC which protects you from the wind, rain and sun and providing you with complete privacy. Because it is made from PVC the panels are easy to clean and wipe dry.
This self-adhesive EPDM sealing kit consists of 2 x 2.00m EPDM strips is designed to seal the gap between the vehicle and the bottom of Thule roof mounted awnings to prevent water ingress when the awning is in use.
Set of 2 clamps to minimise flapping in awning fabric by providing a secure fastening between the awning fabric and side rafter.
The Thule View Blocker G2 - Side is a side panel which is made from top-quality PVC which protects you from the wind, rain and sun and providing you with complete privacy. Because it is made from PVC the panels are easy to clean and wipe dry.
This telescopic tension rafter is an optional extra item to ensure optimal tension in awning fabric to increase wind resistance.
This telescopic tension rafter is an optional extra item to ensure optimal tension in awning fabric to increase wind resistance.
The Thule Rain Blocker G2 - Side is a side panel which is made from top-quality PVC which protects you from the wind and rain while keeping the incidence of light thanks to the large window. Because it is made from PVC the panels are easy to clean and wipe dry.
Thule LED Mounting Rail to allow fitment of the Thule LED strip and the Quickfit tent simultaneously on the Omnistor 5200 awning
Thule LED Mounting Rail to allow fitment of the Thule LED strip and the Quickfit tent simultaneously on the Omnistor 5200 awning
Thule Residence G3 Room for 6300 Motorhome Awnings is suitable for flat walled vehicles and comes in a variety of heights and widths to suit your Omnistor 6300 awning installation. Projection 2.50m.
The Thule Omnistor 5200 Manual Wind Out Motorhome Awning offers both protection from the elements and a stylish space to relax. This wall mounted awning with length of 4.02m and a projection of 2.5m, is supplied with full length brackets suitable for Ducato / Jumper / Boxer H2L4 after 06/2006 with lift roof.
Thule awning bracket set to fit the Omnistor 5200 awning to the H2 L4 Lift Roof version of the Fiat Ducato, Citroen Jumper and Peugeot Boxer.
These kits are for the LHD versions of the above vehicles, meaning the awning will be fitted to the RIGHT SIDE of the vehicle.
Thule awning bracket set to fit the 4.50m Omnistor 9200/6300 to the roof of certain vehicles
Thule awning bracket set to fit the 4.00m Omnistor 9200/6300 awning to the roof of Fendt, Dethleffs and Trigano caravans.