Click for Store Hours
Fiamma Awning Fitting Kits
- per page
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. The only modular bracket fitted to compensate the curved roof of the minivan. Suitable for Renault Master 98, Fiat Ducato, Citroen Jumper and Peugeot Boxer.
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. Suitable for Rapido 9 motorhomes.
Motorhome awning installation kit suitable for F45 and Fiamma Zip awnings. Suitable for motorhomes with fitted roof rails. A minimum of two pieces required to install an awning.
Single, 40cm long aluminium installation bracket for the Fiamma F45 awnings. Suitable for bolt-through-wall installation of F45 awnings on coach-built motorhome and other flat wall installation.
Fiamma awning installation kit suitable for fitting Fiamma Compass awning to the RIGHT HAND SIDE of Renault Trafic, Opel Vivaro and Nissan Primaster from 2001 to 2014. Kit is for standard (low) roof vans and suit SWB and LWB vans.
Fiamma awning installation kit suitable for fitting Fiamma Compass awning to the RIGHT HAND SIDE of VW Transporter T5 and T6 vans. Non-drilling kit fits to existing roof rack mounting points on van roof and suits LWB and SWB vans.
Fiamma Adapter Rapido suitable for installation of Fiamma F45 S and Fiamma Zip awnings to Fiat 708F, 710F, 740F, Fiat Garage 660, 770F, 772F, Mercedes 779M and 779M. Fiamma Adapter Rapido is a one piece bracket with a length of 350cm.
Campervan awning installation kit suitable for fitting Fiamma F35 Pro awning to VW T5 Transporter with Brandrup Top-Rail.
Suitable for installation of Fiamma F35 Pro awning. Use this kit if you have roof bars installed where the bars do not overhand the roof bar mount.
Fiamma Kit Autocruise for F65 awnings has been specifically designed for the installation of Fiamma F65 and F65 S awnings to Autocruise motorhomes. Supplied in 3 pieces each 15cm wide.
- per page