Mail Order Hours:
Manchester Superstore:
Store Hours:
Hitches & Stabilisers
- Towing Aids
- Hitches & Stabilisers
- Leads & Connections
Caravan stabilisers reduce movement and damp out bumps when towing to prevent trailer snaking and reduce shocks trnasmitted through the towbar to the car. Camperlands stock a range of caravan stabilisers and accesories suitable for both standard and swan neck tow bars including Winterhoff, Bulldog and Al-ko hitch stabilisers.
- per page
50mm Pressed Steel Hitch with Indicator
Pressed steel hitch head with safety indicator fits to standard 50mm towball.
Al-Ko AKS 2004 Front and Rear Friction Pads
Replacement front and rear friction pads for the Al-Ko 2004 Caravan Stabiliser.
Al-Ko AKS 2004/3004 Side Friction Pads
Pair of replacement side friction pads to fit the Al-Ko AKS 2500/2700/2004/3004 caravan stabilisers.
Al-Ko AKS 2004/3004 Stabiliser Security Device
Sold secure and TUV insurance approved security device for caravans with Al-Ko AKS 2004/3004 stabiliser hitch.
Al-KO Trailer Plug Holder
Attaches to the trailer or caravan chassis and holds the 7 or 13 pin plug in place to stop it dragging on the floor or getting tangled when not attached to a vehicle.
Bulldog Clamp on Stabiliser Angle Bracket
Clamp on angle bracket allows the stabiliser arm to be attached to the caravan chassis without the need to drill the chassis.
Fits to caravan chassis with box section upto 50mm wide and 90mm deep and can be fitted to most caravans without the need to remove the fairing.
Bulldog LC5 Stabiliser Angle Bracket
Replacement angle bracket for caravan stabilisers complete with fittings. Angle bracket fixes to the caravan chassis and holds the slipper against the stabiliser arm.
Designed to fit the Bulldog 200Q and 100 stabilisers
Bulldog LC5E Extended Stabiliser Ange Bracket
Replacement extended angle bracket for caravan stabilisers gives greater adjustment to allow for relative difference in caravan and tow vehicle height. Lower vehicles or higher caravans will need the extended bracket.
Designed to fit the Bulldog 200Q and 1000 caravan stabilisers
Bulldog LC8 Swan Neck Car Stabiliser Plate
Car stabiliser bracket that allows front mounting caravan stabalisers including the Bulldog 200Q to be fitted to vehicles with swan neck towball.
Brackets clamps on to swan necks upto 43mm diameter and requires 35mm non-tapered section to clamp to.
Bulldog Stabiliser Plastic Slipper
Replacement plastic slipper complete with fasteners to fit any Bulldog caravan stabiliser.
- per page
