Mail Order Hours:
Manchester Superstore:
Store Hours:
Pitching & Connection
All you need to easily pitch your awning and conenct to your vehicle. Whether you have a caravan or motorhome or a smaller campervan or conversion Camperlands stock a full range of awning rails and drive-away fixing kits for free-standing awnings to allow you to snugly fit your chosen awning to your vehicle.
- per page
13mm socket drill adapter for 13mm thread pegs.
Strong suction pad to fix the pole of your awning to the vehicle wall without the need to drill the caravan wall and avoiding the possibility of damage.
Fits poles ½" (13mm) to ¾" (20mm)
Large, soft pad in white rubber avoids damaging or marking the caravan wall. Clamp the bracket onto the underside of the awning roof and hook the roof pole into place.
Metal ground sheet peg with bent over head to help avoid trips.
Kit consisting of 2x end stop with securing screws that attach to the awning rail to prevent the Caravanstore from sliding in the rail.
Drive-away fixing kit to attach awnings to vehicles with awning 'C' rail or Fiamma / Omnistore awnings.
This Magnetic Adapter Awning Kit gives you the option to fix your annexe or awning to your vehicle using a magnetic strip.
Fiamma Tie Down Kit to firmly anchor the awning to the ground in case of wind. The Fiamma Tie Down Kit includes 11m of black or yellow tough adjustable strapping and fits crank awnings and traditional awnings up to 600 cm in length.
Improved version of Tie Down, the Tie Down S allows for solid anchoring of the Fiamma F45, F65 and Caravanstore awning by attaching directly to the front leading edge of the awning. The Fiamma Tie Down S may also be used with any Fiamma Privacy Room from version 2009, by way of buckle that attached to the Privacy side panel.
Fiamma Kit Awning Pegs is a handy new range of screw pegs, ideal for awnings, awning rooms and carpets. Made of tough plastic UV resistant material. You can screw them in the ground manually by using the unique key, which is standard delivered, or by conveniently connecting them to an electrical drill /screw driver
- per page






